I hope to be able to
>fit in a session with Hotz Translator - maybe even on Steem 2.1.
>Gavin.

Hi Gavin and all

here are some tips from the top of my head to install HOTZ Translator in 
Steem

There are two versions of Hotz Translator: an A drive version and a D drive 
version. The reason for the different versions is because of the INF file. 
Heres what you do.

A Drive version:

1.Download the A drive version from the accordance download site and unzip 
into the folder you are using for steems virtual C drive.
2.Remove the PI2/3 files depending if you are using color or mono monitor 
mode. ( see A drive instructions on my Hotz Page or on the accordance 
download site)
3. Start Steem. Hit the Pause/break key so you can get to steems menu. Go to 
the disc manager. Select A drive, and drag an empty disc into the A drive 
slot.Close. Select the green arrow to start steem.
4.Once you are at the Atari desktop in steem, open the C drive, and find the 
Hotz folder. Open it. Select all the files and drag them to the A drive 
icon. This will copy the files right to the empty disc you put in there.
5.Open A drive, and now you can click on Xlator.prg and Hotz Translator will 
load.

D Drive version.
1. Go to your steem folder on your PC Hard drive and create another folder 
called "D-Drive".Unzip the D Drive version (with folder)right into this 
directory
1.Start Steem. Hit the Pause/break key so you can get to steems menu. Go to 
the disc manager. Create another drive for "D". Use the folder you just 
created.Select the green arrow to start steem.
2.Once you are at the Atari desktop in steem, open the D drive, and find the 
Hotz folder. Open it.Now you can click on Xlator.prg and Hotz Translator 
will load.

HOPE THIS WORKS! I will try it myself, but this is from the top of my head 
on how it SHOULD work!Would appreciate feedback if it does (or does not)

TimC