Siel Xpander-80/Suzuki SX-500

This file was created with help from the Siel DK-80 Manual provided by smeyer@worldonline.nl via his site at: http://home-1.worldonline.nl/~smeyer/siel/.  While the DK-80 and Expander-80/Suzuki SX-500 are quite similar, their CC#s are not.  If you have a copy of his manual, please note the differences.

Advanced CC control of the Expander-80/Suszuki SX-500 has lead me to believe it is every bit rhythmically and tonally exciting as a TB-303.

Enjoy!

Ethan Zer0
ethanzer0@yahoo.com  

Continuous Controllers

DEG VCA-A
Parameter 	CC#	Value
01 Attack	12	0-15
02 Decay	13	0-15
03 Break Point	14	0-15
04 Slope	15	0-15
05 Sustain	16	0-15
06 Release	17	0-15
07 Dynamics	18	0=off,1=on
08 Damp Ped	19	0=off,1=on
09 DCO Mode	20	1=Whole, 2=Double

DEG VCA-B
Parameter	CC#	Value
11 Attack	21	0-15
12 Decay	22	0-15
13 Break Point	23	0-15
14 Slope	24	0-15
15 Sustain	25	0-15
16 Release	26	0-15
17 Dynamics	27	0=off, 1=on
18 Damp Ped	28	0=off, 1=on

Detune
Parameter	CC#	Value
21 Interval	29	0-11
22 Fine		30	0-15

Noise
Parameter	CC#	Value
23 Level	31	0-15
24 Destination	32	1=VCA, 2=VCF

DEG VCF
Parameter	CC#	Value
31 Attack	33	0-15
32 Decay	34	0-15
33 Break Point	35	0-15
34 Slope	36	0-15
35 Sustain	37	0-15
36 Release	38	0-15
37 Dynamics	39	0=off, 1=on

LFO 2 to VCF
Parameter	CC#	Value
41 Freq		40	0-15
42 Final Lvl	41	0-15
43 Initial Lvl	42	0-15
44 Delay Time	43	0-15
45 Delay Mode	44	1=Manual, 2=Auto
46 Waves	45	1=Triangle, 2=Square

LFO 1 to VCO	
Parameter	CC#	Value
51 Freq		46	0-15
52 Final LVL	47	0-15
53 Initial LVL	48	0-15
54 Delay Time	49	0-15
55 Delay Mode	50	1=Manual, 2=Auto

DCO
Parameter	CC#	Value
62 Waves	51	0 off, 1 Square, 2 Saw
63 Saw Length	52	1=16',2=8',3=4' NOTE: option available only when CC#51 set to 2
64 Sqr 16' lvl	53	0-15 		NOTE: option available only when CC#51 set to 1
65 Sqr 8' lvl	54	0-15		NOTE: option available only when CC#51 set to 1
66 Sqr 4' lvl	55	0-15		NOTE: option available only when CC#51 set to 1
67 sqr 2' lvl	56	0-15		NOTE: option available only when CC#51 set to 1

VCF
Parameter	CC#	Value
71 Cutoff	57	0-99
72 Resonance	58	0-15
73 KBD Track	59	0=off, 1=half, 2=full
74 Trig		60 	1=Single, 2=Multi
75 DEG Lvl	61	0-15

Chorus
81 Chorus	62	0=off, 1=on

Volume
82 Volume	63	0-15